The 10S17 Electric Wrist Rotator provides the electrical rotation of the Ottobock System Electric Hand or Greifer. Use of the 13E205 MyoRotronic with the 10S17 rotator is required, along with the MyoSelect tool for programming, for all applications EXCEPT for use with switch control or DynamicArm.
This product can be operated in combination with all Ottobock System Electric Hands and System Greifers that are equipped with the Quick Disconnect Wrist.
10S17 Electric Wrist Rotator:
- Required for pronation and supination of the hand
- If muscular tension is not sufficient for operation with the 13E205 MyoRotonic, the 10S17 can be controlled by the 9X14 Harness Pull Switch, the 9X18 Traction Switch, or the 9X25 Rocker Switch.
- 11S4 lock ring
- 11S61 wrist drive with coaxial plug
- 11S25 lock ring
- 9E85 protective cap
- 9E363 drive unit
- 9E365 protection plug
|Operating voltage||6/7.2 V|
|Approx. no-load current||150 mA|
|Approx. stall current||1000 mA|
|Rotation range||360 30 degrees|
|Idle speed||13.5 U/min|
|Corresponds to rotation angle of||81 28 degrees/sec|
10S17 Electric Wrist Rotator - Instructions for Use
Instructions for Use
PDF Document | Published: Jan 11, 2021