LAM. ANCHOR F. WATER RESIST. PROTHESIS | Adapters / Structural Components | Lower Limb Prosthetics | Prosthetics | Ottobock US B2B Site
Skip to content Skip to navigation menu

LAM. ANCHOR F. WATER RESIST. PROTHESIS

Item #: 4WR95=1
4-arm lamination anchor

Available Today
Log in to order

The 4WR95=1 Lamination Anchor is water-resistant. It features a rotating pyramid receiver and an angled anchor arm, which is intended for posterior positioning. This allows easy positioning of the adapter in order to achieve optimized prosthesis alignment. The flexion position of the residual residual limb/socket is taken into account. No or only little manual bending is required.

Only suitable for use in transfemoral prostheses. Use the 4X46 Lamination Dummy when laminating. It must be ordered separately.

Material Stainless Steel
Maximum Body Weight 330 lbs (150 kg)
Product Weight 165 g

4WR95 Lamination Anchors - Instructions for Use

Instructions for Use: 647G635 (EN/DE/FR/IT/ES/PT/NL/SV/DA/NO/PL/HU/CS/RO/HR/TR/EL/RU/JA/ZH)

Published Date: October 8, 2015

4R111, 4R111=N, 4R111=T, 4R116, 4R116=T, 4WR95=2, 4R117, 4R117=T, 4R119=N, 4R119=NT, 4R119, 4R119=T, 4WR95=1 Four Arm Lamination Anchors, 4R41, 4R42, 4R42=1, 4R43, 4R89 Three Arm Lamination Anchors - Instructions for Use

Instructions for Use: 647G123 (EN/DE/FR/IT/ES/PT/NL/SV/DA/NO/PL/HU/CS/RO/HR/BS/TR/EL/RU/JA/ZH)

Published Date: July 5, 2017