Attention: this shop site will be shutting down soon. Please visit our new website and sign up for an account today. Ths does not apply to OPIE customers.
Refit adapter for lamination anchor
Item #: 4R47=5.0Refit Adapter, for lamination anchor, corrosion resistant
Overview
If the fitting was modified from a previous knee joint generation such as the 3B1-2, 3B1-3, 3B5-2, 3B5-3; 3C98-*, 3C88-* to a Genium X4 knee joint (3B5-4=P/3B5-4=ST) or a new Kenevo knee joint (3C60=5/3C60=ST-5) without fabricating a new socket, the changed position of the pyramid/threaded connector has to be taken into account since the pyramid/threaded connector is no longer angled (0°). Use intermediate adapters (e.g. 4R47=*, 4R48=*) to adjust the position if necessary.
The refit adapters help copy the alignment by equalizing the inclination/angle of the knee head when switching from a previous Kenevo model to the updated Kenevo (3C60=5/3C60=ST-5).
If the fitting was from a previous knee joint with an inclination of the knee head (i.e. 5° for 3C60=A*/3*/4*), without fabricating a new socket, the changed position of the pyramid/threaded connector has to be taken into account since the pyramid/threaded connector is no longer angled. Use intermediate adapters (e.g. 4R47=*, 4R48=*) to adjust the position if necessary. This adapter is corrosion resistant.
- 4R48=5.0 for sockets with 4-hole attachment at the distal end of the socket
- 4R47=5.0 for fittings with threaded top knees (ST)